Order quickly and securely

Shipping from Germany, personal support and fast delivery.

Handyprobe HP3, 1-Channel Portable Differential USB Oscilloscope HP3-100, 1MSa Memory, Professional Set, 2 Years Warranty

TiePie

Handyprobe HP3, 1-Channel Portable Differential USB Oscilloscope HP3-100, 1MSa Memory, Professional Set, 2 Years Warranty

SKU: HP3-100XMPS

Category: Measuring Instruments

GTIN: 7423622827870

High voltage differential input range to 800V
10bit resolution, 0.3% DC vertical accuracy, 0.2% typical
Up to 100MSa/s sampling
Up to 50MHz bandwidth
Up to 10MSa/s, 10bit continuous streaming
Up to 1MSamples memory
Sophisticated measuring software included

396,27 €

incl. 19% VAT , plus

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

pcs.

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

Handyprobe HP3, 1-Channel Portable Differential USB Oscilloscope

A new standard in portable measuring:

The world's first PC based 100MSa/s differential USB high voltage oscilloscope.

The Handyprobe HP3 combines a fast sampling up to 100MSa/s with a high voltage input range of 800V and a differential input in a small and light enclosure. Powered only by USB, this versatile high voltage USB scope enables safely measuring high voltages anywhere in the field.

The excellent hardware specifications and the versatile software make the Handyprobe HP3 an ideal instrument for measuring in e.g. mains power installations, switch mode power supplies, frequency converters, automotive applications, etc. The balanced differential input also makes it possible to measure directly on various communication buses with balanced signals, like e.g. CAN.

HP3 Model		100	20	5
Max. sampling rate:		100MSa/s	20MSa/s	5MSa/s
Max. streaming rate:		10MSa/s	2MSa/s	500kSa/s
Max. record length:	standard model	16kSa	16kSa	16kSa
Max. record length:	XM option	1MSa	1MSa	1MSa

Sophisticated software

The Handyprobe HP3 comes with the versatile Multi Channel measurement software that allows to do measurements in a quick and convenient way. With the software, the Handyprobe HP3 can be
operated as an oscilloscope, a multimeter, a spectrum analyzer and a y-t recorder (data logger). The captured data can be viewed in many different ways, in a single graph or in multiple views, each displaying a different property of the measured signal.

Differential input

The Handyprobe HP3 is equipped with a high voltage differential input with a maximum input range of 800VDC (566VRMS). Because of the differential input, it is not possible to create a short circuit to ground through the USB oscilloscope. The high voltage input range makes it possible to use the Handyprobe HP3 without additional attenuators.

Fast streaming

The advanced driver technology makes it possible to measure a continuous stream of data from the Handyprobe HP3 high voltage oscilloscope to the computer, at a maximum rate of 10MSa/s. The maximum measuring time is only limited by the available space on the hard drive. The high sampling rate makes it possible to capture short events with high accuracy. It is also possible to monitor e.g. the line power with the Handyprobe HP3 high voltage oscilloscope for a very long time and afterwards view and analyze each cycle of the signal thoroughly.

Low noise measuring lead

The input of the Handyprobe HP3 high voltage oscilloscope is differential, which means that both sides of the input have a high impedance. There is no connection to ground as in conventional oscilloscopes which are used with coax cables and standard oscilloscope probes.

The special low noise Measure lead TP-C812A is developed for the Handyprobe HP3 high voltage oscilloscope. It is very insensitive to external interfering signals. The two ends can be placed up to two meters apart, while picking up very little interference. With a conventional oscilloscope with standard oscilloscope probes this is not possible. The maximum distance between the positive side and ground of a standard oscilloscope probe is usually limited to approximately 20cm. The Measure lead TP-C812A for the Handyprobe HP3 high voltage oscilloscope does not have this limitation. Measuring between two distant points is now no problem anymore. The Measure lead TP-C812A uses a heat resistant silicone isolation and shrouded banana plugs.

Technical data:

Please download the datasheet for more details: Data Sheet Handyprobe HP3

Download users manual: Manual HandyprobeHP3

Scope of delivery:

The Handyprobe HP3 is available as Professional set (option PS) and as standard set. The sets contain:

	Professional set	Standard set
Cary case:	Carry case BB271	Cardboard box
Instrument:	Handyprobe HP3	Handyprobe HP3
Measure lead:	Measure lead TP-C812A	-
Alligator clips:	Alligator Clip TP-AC80I	-
Test probe:	Test Probe TP-TP90	-
Accessories:	Wrist strap	-
Software:	for Windows 10 / 11, download via website	for Windows 10 / 11, download via website
Drivers:	for Windows 10 / 11, download via website	for Windows 10 / 11, download via website
Software Development Kit:	for Windows 10 / 11 and Linux, download via website	for Windows 10 / 11 and Linux, download via website
Manuals:	instrument manual and software users manuals colour printed and digital download via website	instrument manual and software user's manuals, download via website