All categories
Power Supply
6 products found
3 Phase Devices
6 products found
Control Technology
8 products found
New Arrivals
2 products found
Temperature Regulator
2 products found
Built-In Instruments
9 products found
Voltage Meter
8 products found
Current Meter
9 products found
Measuring Instruments
14 products found
Process Management / Regulator
7 products found
Power Meter
4 products found
Measuring Transducers
2 products found
Industry Electronics
14 products found
Industrial Measurement
14 products found
Other industrial electronics
6 products found
RS-485/MODBUS Components
12 products found
Special items
Price range
€
€
- SKU:
- LP10 Vff
- Variations in:
-
- Phases/Relay Outputs
- Compact size 17.5mm
- True RMS measurement
- Under voltage protection
- Over voltage protection
- Phase unbalance protection
- Phase failure protection
- Phase incorrect sequence protection
- Neutral failure protection
- 'Adjustable nominal voltage, trip point, trip time delay
- On site selection of VLL/VLN value based tripping
- Self powered
- Product variants for 1 or 3 phases and with 1 or 2 relay outputs
- LED indication for faults
- Disabling of over & under voltage fault on site is possible
- SKU:
- SM5ff
- Variations in:
-
- Supply Voltage
- SKU:
- SM4ff
- Variations in:
-
- Supply Voltage/Outputs
- SKU:
- SM3ff
- Variations in:
-
- Supply Voltage
- Conversion of logic states or pulses into RS-485 MODBUS
- Two programmable logic or counter inputs
- Auxiliary counters with reset possibility
- Counter state strored in non-volatile memory
- Configurable data transfer rate
- DIN rail mounting
- 3 years warranty
- SKU:
- SM2ff
- Variations in:
-
- Input Variant / Supply Voltage
Best sellers
- SKU:
- SM1ff
- Variations in:
-
- Input Variant / Supply Voltage
Best sellers
- SKU:
- S4AOff
- Variations in:
-
- Analogue Outputs/Supply Voltage
- SKU:
- S4AIff
- Variations in:
-
- Inputs/Supply Voltage
- SKU:
- RE70 00M0
- SKU:
- RE62ff
- Variations in:
-
- Output Variant
- Universal input for RTDs, thermocouples and analog signals
- Relay outputs
- Additional output: 0/4-20mA or 0/5V (SSR)
- PID on/off control algorithm
- Innovative SMART PID algorithm
- Interface: RS-485 with MODBUS RTU protocol
- Universal power supply 24V or 230V AC/DC
- Modular design fulfills the requirements for devices mounted in standard modular switchgears
- Advanced graphic OLED display which guarantees clear indication, high contrast and wide viewing angle
- Configuration parameters via keys or the RS485 and free eCon software
- Supplied with test certificate
- 3 years warranty
- SKU:
- RE12S
- Control action: Adaptive, Auto, Self-tune PID, ON-OFF
- Universal input: Thermocouple (J, K, T, R, S, C, E, B, N, L, U, W, Platinel II), RTD (PT100)
- Display: 4+4 digits LED display (White+Green)
- Profile Controller: Up to 128 steps
- Communication: RS485 MODBUS RTU
- Power Supply: 90...270 VAC/DC (50/60Hz)
- Alarm Outputs: Multiple settings including deviation high/low, absolute high/low, band, sensor break
- Hysteresis: 0.1...99.9°
- Compact design with short depth for easy panel mounting,
- Dimensions: 52 x 52 x45mm³
- SKU:
- RE11
- 4+4 digits, 7 segment LED Dual high-contrast Display
- Universal input for TC/ RTD sensors
- PID, ON-OFF Control
- Auto-Tuning / Self Tuning
- Two Set points
- °C /°F selectable
- Field selectable Control Output (Relay or SSR)
- Auxiliary Output: Relay
- SKU:
- PD9W
- 1x RS232 port for RTS/CTS signals
- 1x RS485
- 802.11b/g/n WiFi support
- 1x Ethernet WAN/LAN port
- SKU:
- PD9
- Two communication interfaces: 1x RS485, 1x Ethernet WAN/LAN
- Simple configuration via webpage or tool software
- Compact size designed for DIN rail mounting
- Work modes: TCP server, TCP client, UDP server, UDP client
- Support Modbus RTU to TCP, Modbus Polling
- Support DHCP, dynamic or static IP
- Watchdog function
- Wide working temperature range from -40 to 85°C
- Upgrade firmware via network
- SKU:
- PD51ff
- Variations in:
-
- Supply Voltage
- SKU:
- PD24 00M0
- USB interface (type A) - destined for the device communication with the computer
- RS-232 interface - destined for the communication with devices from the object side
- compliance with the standard USB 1.1 and USB 2.0
- SKU:
- PD20 00M0
- USB interface (type A) - destined for the device communication with the computer
- RS-485 interface - destined for the communication with devices from the object side
- Compliance with the standard USB 1.1 and USB 2.0
- SKU:
- P30Uff
- Variations in:
-
- Variant
- Universal measuring input, programmable
- Input, output signals and power supply galvanically isolated
- Internal data memory for 534.336 samples
- Output standard signal variants: 0/4-20mA
- 2 Relay outputs
- Supply voltage: 85-253VDC/85-300VDC
- SKU:
- P30Off
- Variations in:
-
- Variant
- 2 universal measuring inputs for sensors with pulse outputs
- Input, output signals and power supply galvanically isolated
- Output standard: 0/4-20mA
- Relay output
- 24VDC output for ext. sensor
- Supply voltage: 85-253VDC/AC
Best sellers
- SKU:
- NS5ff
- Variations in:
-
- Input Voltage/Supply Voltage/Interface
- SKU:
- NR30IoTff
- Variations in:
-
- Input Current _ Supply Voltage
- SKU:
- NF20 96ff
- Variations in:
-
- Number of Outputs
- SKU:
- NF20_144ff
- Variations in:
-
- Number of Outputs
- SKU:
- ND30IoTff
- Variations in:
-
- Supply Voltage
- Measurement of 54 parameters and harmonics up to the 63rd harmonic for current and voltage in symmetrically or asymmetrically loaded single-phase 2-wire systems and three-phase 3-or 4-wire systems.
- 3.5" colour TFT graphic display, 320 x 240 pixels, user-programmable arangement of parameters in the displays (8 parameters in each of the 10 display pages)
- Displays that take into account the values of the programmed turn ratios
- Memory for maximum and minimum values
- 2 configurable alarm outputs
- Function of the monitoring relays for alarm outputs, optional: analogue output 0/4-20mA and 2 Pt100 inputs
- Optional RS-485 interface - Modbus protocol
- Archiving of up to 32 measurement parameters in internal 8GB data memory (optional)
- Modern and user-friendly Ethernet 10/100 BASE-T'm interface (otpional):
- Protocol: MODBUS TCP/IP, HTTP, FTP, Services: Web servber, FTP server, DHCP
- MQTT protocol for IoT applications
- Parameter programming via free eCon software
- Real time clock (RTC) with battery backup
- SKU:
- ND20LITE22100M1
- SKU:
- ND10ff
- Variations in:
-
- Input Current
- SKU:
- N43ff
- Variations in:
-
- Input Voltage/Supply Voltage
- SKU:
- N32Uff
- Variations in:
-
- Supply Voltage/Additional Outputs
- Multi-purpose input for measuring: temperature, resistance, standard signals
- Two-line LCD display with high contrast and built-in backlighting
- Possibility of displaying the measured value and time simultaneously or an uncalculated quantity or unit (programmable unit of measured quantity)
- Meter programming from keyboard or through the RS-485 interface by means of the free eCon software
- 4 alarm outputs with signalling on LED diodes, working in 7 different modes (option)
- Conversion of any measured value into an analog signal 0/4...20 mA or 0...10 V (option)
- Storage of minimal and maximal values for all measured quantities
- Supply of object transducers
- 32-point individual characteristic for the measured value
- Mathematical functions for converting the measured value
- Mounting dimensions: 96 x 48 x 93mm
- SKU:
- N32Pff
- Variations in:
-
- Supply Voltage/Additional Outputs
- Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cos phi, tan phi, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
- Current and voltage harmonics analysis up to 51st (measurements available via RS-485).
- Two-line LCD display with high contrast and built-in backlighting
- Possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
- Programmable measuring range (current 1 A / 5 A and voltage 100 V /230 V / 400 V)
- High sampling frequency of measured signals
- Programming parameters via buttons or RS-485 interface and free e-con software
- 4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
- Possibility to program each of the alarms to react to a different measurements
- Pulse output to control energy consumption
- Conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
- Memory of minimal and maximal values for all measured quantities
- Mounting dimensions: 96 x 48 x 93mm
- SKU:
- N32Hff
- Variations in:
-
- Supply Voltage/Additional Outputs
- Voltage measurement ±600V (maximum range display ±1200V), current measurement via shunt, power, energy and capacity measurement of DC circuits
- two-line LCD display with high contrast and built-in backlighting
- possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
- Wide range of voltage measurement at the shunt input up to 1500 mV
- high sampling frequency of measured signals
- programming parameters via buttons or RS-485 interface and free e-con software
- 4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
- pulse output to control energy consumption
- conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
- memory of minimal and maximal values for all measured quantities
- automatic voltage measurement compensation function
- Mounting dimensions: 96 x 48 x 93mm