Radiation & EMF Meters for Electric & Magnetic Fields, RF, Radioactivity & Radon

• Optional accessory for GM330 Gaussmeter
• 1-axis axial probe
• DC/AC magnetic field probe
• Wide dynamic measurement range: 0.1G – 30kG
• AC frequency range: 10–2000Hz

• Optional accessory for GM330 Gaussmeter
• 1-axis thin transversal probe
• DC/AC magnetic field probe
• Wide dynamic measurement range: 0.1G – 30kG
• AC frequency range: 10–2000Hz

• Optional accessory for GM330 Gaussmeter
• 1-axis flexible probe for universal use
• DC/AC magnetic field probe
• Wide dynamic measurement range: 0.1G – 30kG
• AC frequency range: 10–2000Hz

• Optional accessory for GM330 Gaussmeter
• 3-axis vector probe
• DC/AC magnetic field probe
• Wide dynamic measurement range: 0.1G – 30kG
• AC frequency range: 10–2000Hz

• Magnetfeldmessung (DC, AC und Peak Hold)
• Großer dynamischer Messbereich: 0,1 ´´G – 30 kG
• Datenspeicherung auf SD- Karte
• AC- Frequenzbereich: 10–2000Hz
• Analoger Ausgang

• Meter for electrical DC fields (electrostatics)
• Measuring principle: field mill
• Display of the surface voltage versus the distance
• Li-Ion rechargeable battery, USB interface, software
• Supplied with works calibration certificate

• Low-frequency alternating electric fields (LF) from 10Hz to 5kHz
• Low-frequency alternating magnetic fields (LF) from 10Hz to 5kHz
• Electromagnetic fields (HF) from 1MHz to 10GHz
• 3D measurement of magnetic fields
• Audio indicator: Excellent sound analysis for distinguishing sources

• Low-frequency alternating electric fields (LF) from 10Hz to 5kHz
• Low-frequency alternating magnetic fields (LF) from 10Hz to 5kHz
• Electromagnetic fields (HF) from 1MHz to 8GHz
• 3D measurement of magnetic fields
• Audio indicator: Excellent sound analysis for distinguishing sources

• meter for electrical DC fields (electrostatics)
• measuring principle: field mill
• display of the surface voltage versus the distance
• supplied with works calibration certificate

• Magnetic pulse amplifier for connection to an oscilloscope
• 4 measuring ranges each: 0 - 6,000 gauss/volt or 0-6,000 millitesla/volt
• Max. output signal per measuring range: ±6V
• Supplied with one-dimensional magnetic probe

Audit-Case-Set EFM 023 AKC includes :

• EFM 023

• CPS 023

• VMS 023

• UAC 110

• Measuring device for DC electric fields, surface voltmeter
• Measuring range: 0 to ±29.999kV
•  Calculating the voltage of an object and the voltage differences in space and between solids
•  Determine if sparking is likely
•  Measuring voltage and surface charge of small objects
• Calculation of electric field strength
•  Calculation of attraction/repulsion force between surfaces or objects
•  Determination of “Ohms per square” and self-discharge time of surfaces or objects
• Analog output
• Supplied with NIST traceable calibration certificate

• Measurement of alpha, beta, gamma and X-ray radiation
• high measuring accuracy
• internal memory for 4000 readings
• Large LCD display
• Beep per pulse when counting pulses
• Bluetooth interface
• Data evaluation with software

Accessory for the Gaussmeters GM1-HS or GM1-ST.

• Displays X, Y, Z and magnitude of magnetic field
• Measurement of static residual magnetism
• Maximum range is ±799.99 gauss.
• Peak Hold mode
• Sound alarm and light
• Intuitive use with rapid turn on
• Battery or AC power supply
• Alarm output jack
• CE compliant
• Certificate of NIST Traceability
• Detachable rubber boot

• measuring ranges: 0-200V/m and 0-2.000V/m
• frequency range: 10Hz to 400kHz
• frequency filter module and large range of accessories
• optional AC/DC analogue outputs
• field strength proportional tone signal

• Inexpensive test receiver with a large bandwidth: 200MHz to 8GHz
• Also detects the current 5G frequencies!
• High receiver sensitivity
• OLED display for precise readings: 0.01µW/m² to 2,500,000µW/m ²
• High-quality signal sound reproduction, 3-level volume
• Simultaneous display of peak, maximum and average values
• Detection of very short pulses (<5µs)
• LED traffic light display for readings evaluation
• Every device comes with a NEMKO calibration certificate!
• 3,5mm headphone jack
• Connection for external power supply
• 2 years warranty

• Detects and measures among other things: 5G frequencies in the 20-40GHz range
• Easy to use
• Supplied with stub antenna and horn antenna
• Professional measurement accuracy at an affordable price
• High receiver sensitivity
• OLED display: 0.5 to 500,000µW/m²

• Detects and measures among other things: 5G frequencies in the 20-40GHz range
• Easy to use
• Professional measurement accuracy at an affordable price
• High receiver sensitivity
• OLED display: 0.5 to 500,000µW/m²

• Attention: No sale of this product to private individuals!
• Displays field strength up to 199.999 micro teslas
• A relative zero mode subtracts the background field 
• Backlit display can be turned on.
• Lightweight meter with long battery life
• Vector magnetometer for determining the direction and strength of the field